1、 When the industrial cold assembly box needs to be shut down, it is necessary to consider the protection of the industrial cold assembly box in the safe shutdown range before all the shutdown operations can be carried out. In order to avoid large pressure, it is necessary for the user to close the suction stop valve to stop the operation of the compressor.
2、 After the compressor of industrial cold assembly box is shut down, it is necessary to operate the oil pump. Return the slide valve of the industrial cold assembly box to the zero scale position, so that the load shedding reaches zero. At this time, the oil pump will stop all operation immediately.
3、 Industrial cold assembly box, and then need to stop the operation of the pump and cooling tower. After stopping the operation of such equipment, the whole power supply of the industrial cold assembly box can be turned off, and the whole shutdown process of the industrial cold assembly box can be completed. Ensure that the industrial cold assembly box is in safe shutdown state.
Precautions for shutdown of industrial cold assembly box
1. If the machine is shut down for a long time, special treatment is needed for the industrial cold assembly box. Including the condenser and evaporator, the refrigerant should be completely pumped to the condenser, and all the water should be drained to avoid corrosion and other problems.
2. After the shutdown, it is necessary to carry out detailed inspection for all kinds of accessories. The shutdown process of industrial cold assembly box is more particular, with the help of safe shutdown steps, the service life of the equipment can be extended. Especially for the long-term shutdown of industrial cold assembly box, it is necessary to carry out detailed detection to ensure that the equipment is far away from all kinds of corrosive substances and improve the shutdown safety of industrial cold assembly box equipment.
The safe shutdown of industrial cold assembly box and the use of attention points need you to take a closer look, better and more careful use of industrial cold assembly box.